2 pages

Sigma Marine Coatings Manual_Part18

of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Sigma Marine Coatings Manual_Part18
   page 3/4  March 2011  PHENGUARD 965 Overcoating table for Phenguard 965 for dft up to 100 μ m substrate temperature5°C10°C15°C20°C30°Cminimum interval24 hours20 hours14 hours8 hours6 hoursmaximum interval28 days25 days21 days14 days7 days surface should be dry and free from any contamination –  Curing table for dft up to 100 μ m substrate temperaturemin. curing time of Phenguard 965 system before transport of cargoes without note 4, 7, 8 or 11 and ballast water and tanktest with sea water 5°C7 days10°C5 days15°C4 days20°C3 days30°C2 days minimum curing time of Phenguard 965 system before transport of cargoes  –with note 4, 7, 8 or 11: 3 months for detailed information on resistance and resistance notes, please refer to  –the latest issue of the Cargo Resistance List for transport of methanol and vinyl acetate monomer, a hot cargo cure is  –required which cannot be substituted by a service period of 3 months with non-aggressive cargoes adequate ventilation must be maintained during application and curing  –(please refer to sheets 1433 and 1434) when used as a primer under solvent free tank-linings the dft must be limited  –to a maximum of 100 μ m  Pot life (at application viscosity) 5°C8 hours10°C6 hours15°C4 hours20°C2 hours30°C1 hour    page 4/4  March 2011  PHENGUARD 965 Whilst it is always the aim of PPG Protective & Marine Coatings to supply the same product on a worldwide basis, slight modi fi cation of the product is sometimes necessary to comply with local or national rules/circumstances.Under these circumstances an alternative product data sheet is used. Explanation to product data sheets see information sheet 1411 Safety indications see information sheet 1430 Safety in con fi ned spaces and health safetyExplosion hazard - toxic hazard see information sheet 1431 Safe working in con fi ned spaces see information sheet 1433 Directives for ventilation practice see information sheet 1434 Cleaning of steel and removal of rust see information sheet 1490  LIMITATION OF LIABILITY The information in this data sheet is based upon laboratory tests we believe to be accurate and is intended for guidance only. All recommendations or suggestions relating to the use of the Sigma Coatings products made by PPG Protective & Marine Coatings, whether in technical documentation, or in response to a speci fi c enquiry, or otherwise, are based on data which to the best of our knowledge are reliable. The products and information are designed for users having the requisite knowledge and industrial skills and it is the end-user's responsibility to determine the suitability of the product for its intended use. PPG Protective & Marine Coatings has no control over either the quality or condition of the substrate, or the many factors affecting the use and application of the product. PPG Protective & Marine Coatings does therefore not accept any liability arising from loss, injury or damage resulting from such use or the contents of this data sheet (unless there are written agreements stating otherwise). The data contained herein are liable to modi fi cation as a result of practical experience and continuous product development.This data sheet replaces and annuls all previous issues and it is therefore the user's responsibility to ensure that this sheet is current prior to using the product.The English text of this document shall prevail over any translation thereof.  PDS 7959 199289 offwhite 7001002200 199282 pink 6007002200 199284 grey 5000002200   Worldwide availability REFERENCES
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks